1107.438
Description
MULTI AXIS AUTOPILOT
The Multi Axis autopilot is composed of Oblò A/P or Oblò2 A/P or Eclipse, the ACU module and one FX75 Servos for each axis.
AUTOPILOT COMPONENTS
OBLÒ A/P, OBLÒ2 A/P ACU (Autopilot Control Unit) SERVO FX75
AUTOPILOT FEATURES
- HDG/TRK Mode: Heading and Tracking, Horizontal navigation
- ALT Mode: keep an altitude, climb or descend to a preselected altitude
- NAV Mode: follows a GOTO or a Flight Plan from an external GPS
- Remote control, engage/disengage both axes from the stick or yoke.
- Hold HDG/TRK button does a 180° left turn.
- Hold NAV button does a 180° right turn.
- User settable rate of climb (Vs)
- User settable override torque
AUTOPILOT COMPOSITIONS
OBLÒ - OBLÒ2 based AUTOPILOT
The components required for an Oblò-based autopilot are:
- 1 Cod. 801010 Oblò A/P (Autopilot version), € 1280,99 exc. VAT, (includes a standard Oblò Cod. 801000 with the Autopilot function already active).
or
- 1 Cod. 801011 Oblò2 A/P (Autopilot version), € 1380,16 exc. VAT, (includes an Oblò2 Cod. 801002 with the Autopilot function already active).
A standard Oblò Cod. 801000 or an Oblò2 Cod. 801002 can be upgraded to A/P version by purchasing the sw activation key Cod. 801020.
See here what this new Flybox Connect APP can do
Features
Oblò is a compact, lightweight, easy to install instrument that fits into a standard 3 1/8" (80mm) cutout.
With its round display it integrates:
- Digital attitude indicator
- Altimeter with QNH
- Air Spees Indicator
- Gyro Compass featuring magnetic heading and GPS tracking
- Vertical speed indicator
- Turn Rate Indicator
- Gmeter
- HSI & Gyrodirectional
- Measure and units are configurable.
Unlike other products similar in size, the Oblò does not display the speed and altitude taken from a GPS system, but calculates them by itself.
Gps signal can be taken from the Flybox optional antenna (cod. 810010) or any of the Gps device with NMEA output available on the market.
The airspeed and altitude indications, based on pressure sensors, do not suffer the typical delays and errors of GPS-based indications.
Oblò displays true aircraft attitude thanks to the integrated AHRS inertial platform, equipped with solid-state micromachined sensors (gyros, accelerometers and magnetometers) and an adaptive algorithm.
Using a state of art custom TFT LCD, the display visibility results to be at the best standards also in direct sunlight with an adjustable brightness.
The calibration performed for each instrument guarantees for the altimeter a maximum error of 0.5 millibar (4.6meters) in a temperature range of -20 ~ +70°C and an altitude range of -1000 ~ +25,000 feet and for the airspeed a maximum error of 3 km/h at low speed (below 30km/h), which decreases as the speed increases.
Oblò provides the following three screens that is possible to select with a fast turn or the knob.
Main screen - Attitude indicator
Easily readable menu cells, with auto-zoom on the selected item allowing access to the desired informations in a easy and intuitive way and parameters settings.
This picture shows the reading of the G-meter peak memory.
HSI
(horizontal situation indicator)
Hsi screen, when connected with a GPS via Nmea output, provides current position, direction, distance when a GoTo or a Flight Plan is activated; When not connected with GPS, it is a gyrodirectional.
Master altimeter
With the new improved feature Oblò becomes a real drum altimeter that allows to set the reference pressure in the QNH boxes in hPa as well as in Hg.
Technical data
FLIGHT DATA:
- Attitude indicator
- Airspeed tape
- Altitude tape
- Heading tape
- Vertical Speed Indicator
- G-meter with peak memory
- Slip indicator
- Turn rate indicator
- Target bugs may be set for heading and altitude
- GPS receiver (optional)
- Intercom signal out
- Software upgradable by means of USB port
OTHER FUNCTIONS:
- 2 axis Autopilot capability (go to the product page)
Technical specifications:
- Dimensions: 83 x 83 x 61 mm
- Weight: 300 g
- Operating temperature range: -20 ~ +70°C
- Power supply: 10~20 Vdc, 0.26 A
- Connections via DSUB 15 pin connector
- Brightness: 1200NITS, adjustable
- USB port for software updates
- RS232 and CAN communication ports
- Solid-state sensors
What is included:
- Oblò or Oblò2 instrument
- Printed user manual (ENG version)
- DB15 connector
- USB cable
- M4x10mm screws
- 120 ohm resistor
- Microfibre cloth
- Packing list
Optional accessories:
- Cod. 801020 A/P key (required to add the Autopilot functions to a standard Oblò Cod. 801000 and to Oblò2 Cod. 801002)
Documents
Reviews